Difference between revisions of "3Doodler Printer"

From Open Garage Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 
When [https://twitter.com/deeeep @deeeep] came into the garage with one of the first 3Doodlers today, we immediately knew we had to try to connect it to a CNC to see if we could make our first rudimentary prints with it.
 
When [https://twitter.com/deeeep @deeeep] came into the garage with one of the first 3Doodlers today, we immediately knew we had to try to connect it to a CNC to see if we could make our first rudimentary prints with it.
 +
 +
more information can be found [http://anthony.liekens.net/index.php/Computers/3DoodlerPrinter here]
  
 
Hack a day featured this project: [http://hackaday.com/2013/10/20/3doodler-in-the-wild/ 3Doodler in the Wild]
 
Hack a day featured this project: [http://hackaday.com/2013/10/20/3doodler-in-the-wild/ 3Doodler in the Wild]

Latest revision as of 15:59, 27 October 2013

When @deeeep came into the garage with one of the first 3Doodlers today, we immediately knew we had to try to connect it to a CNC to see if we could make our first rudimentary prints with it.

more information can be found here

Hack a day featured this project: 3Doodler in the Wild

3Doodler

The 3Doodler was a very successful kickstarter project pushing an affordable ($75) 3D printing "pen" and @deeeep has #48 of the first run. After a few test prints, we had to open it up to see some of its guts.