3Doodler Printer

From Open Garage Wiki
Revision as of 19:46, 19 October 2013 by Aliekens (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

When @deeeep came into the garage with one of the first 3Doodlers today, we immediately knew we had to try to connect it to a CNC to see if we could make our first rudimentary prints with it.

3Doodler

The 3Doodler was a very successful kickstarter project pushing an affordable ($75) 3D printing "pen" and @deeeep has #48 of the first run. After a few test prints, we had to open it up to see some of its guts.